Silverguard Plus Car Cover Installation & Cleaning

Installation:

Your Silverguard Plus Car Cover installation process comprises of a couple of steps that are detailed below:

The first step involves the unfolding of your Silverguard Plus Car Cover that you can achieve by placing the car cover at the center of your vehicle body.

In the second step, you can place the mirror pockets at the appropriate places of the vehicle if they are available with your Silverguard Plus Car Cover and as soon as you cover the mirror pockets, you can move ahead to cover the front and rear bumpers of the vehicle. In this manner, by covering the mirror pockets first, you would be able to easily install your car cover in windy weather conditions.

The third step involves draping of your Silverguard Plus Car Cover around the other remaining portions of your vehicle and this you can easily achieve by placing the Silverguard Plus Car Cover over those specified positions.

Cleaning:

1. Silverguard Plus Car Covers can be easily cleaned by using two procedures: by washing the car cover properly with your hands as well as by using automatic speed control washers ( M/Cs) for this purpose. The first cleaning process (hand washing) is applied to Silverguard Plus Car Covers that are not so dirty and this is achieved bit by bit by using both hands.

For machine cleaning, you are required to use huge automatic speed control washers (M/Cs) and small or medium-sized M/Cs are not to be opted for the purpose of washing your Silverguard Plus Car Covers as small washing space may yield difficulty in fabric movement. Altogether, you should not use agitators while washing your car covers in M/Cs as agitators might tear off your Silverguard Plus Car Covers.

2. Apart from using hands and machines to clean your Silverguard Plus Car Covers, you can opt for another simple cleaning process. You can place your car cover over your car, bring the inside out and then clean it by spraying water from a hose.

Important Pointers On Cleaning Instruction:

1. To cleanse your Silverguard Plus Car Covers properly, you need to opt for a non-caustic, non-toxic, eco-friendly and biodegradable anionic detergent. As you avail of this detergent, you need to mix two cups of it with cold/warm water and thereafter the Silverguard Plus Car Cover is to be soaked in the mixture for 5 minutes. Five minutes of soaking would release the dust particles attached to the cover and as soon as it is completed, the Silverguard Plus Car Cover is to be washed gently for 5 minutes. Then, you are required to rinse the cover with two cycles and again one cycle rinsing of the cover is required to half-dry your Silverguard Plus Car Cover. After half drying, the remaining portion of the cover would dry up automatically as soon as it is exposed to air.

2. Proper cleaning of your Silverguard Plus Car Covers is possible only at 20-27 degree centigrade. You are instructed not to use automatic dryer in the process and also not to dry clean your Silverguard Plus Car Covers.

Colors & Materials

CUSTOM SEAT COVERS

CUSTOM CAR COVERS

CUSTOM DASH COVERS

CUSTOM FLOOR MATS

View All Floor Mats

WOOD DASH KIT GALLERY

Installation & Cleaning

To Top