Poly Cotton Seat Covers Installation & Cleaning

Installation:

For easy and successful installation of Poly Cotton Seat Covers, you are required to adopt certain definite installation steps. Step-by-step installation instructions for all Poly Cotton Seat Covers, namely, Poly Cotton Backrest Seat Cover, Poly Cotton Solid Bench Seat Cover, Poly Cotton Seat Bottom Cover and Poly Cotton Console Cover are included below:

Poly Cotton Backrest Seat Cover Installation

To install the Poly Cotton Backrest Seat Cover around bucket seats with non-removable headrest, fold the seat forward and then cover the original seat cover with the Poly Cotton Backrest Seat Cover.

In other car seats, to effectively install Poly Cotton Backrest Seat Cover, first insert the flap through the opening between seat back and seat bottom. Now, install the Velcro fastener and then cover the original seat cover with the Poly Cotton Backrest Seat Cover.

For successful installation of Poly Cotton Backrest Seat Cover on older jeep models, just fold the seat forward first and then cover the original seat cover with the Backrest Seat Cover.

You can easily install the Poly Cotton Backrest Seat Cover around 60/40 split bench seats by simply following these steps:

1. Remove the headrest.

2. Now, fold the seat forward and insert the flap between the seat back and seat bottom.

3. Now, fix the Velcro fastener and place the Poly Cotton Backrest Seat Cover across the original seat cover.

Poly Cotton Solid Bench Seat Cover Installation

Fold the seat forward first and then drape the backrest cover around the backrest.

Now, if the Solid Bench Seat is equipped with an armrest, you should position the backrest cover at a top high position, above the armrest and if the Solid Bench Seat has a headrest you are required to remove it before proceeding ahead to install the Poly Cotton Solid Bench Seat Cover.

Poly Cotton Seat Bottom Cover Installation

Just fold the seat forward and then cover the original seat cover with the Poly Cotton Seat Bottom Cover.

Now, insert the flap through the fixed buckles and hooks and then tuck the additional Poly Cotton Seat Bottom Cover behind the plastic material.

Poly Cotton Console Cover Installation

In this installation process, you need to open the console first and then cover the console top and the console bottom.

After covering the console top as well as the console bottom, push the flap through the opening between console top and console bottom and fasten the Velcro fastener.

Other Installation Instructions

Other than the aforementioned installation guidelines, you are required to follow certain other installation instructions for successful installation of your Poly Cotton Seat Cover. These are included below:

You are required to make a small opening in your Poly Cotton Seat Cover to install it over levelers/controls that are used to support your seat.

Only Poly Cotton Seat Covers designed with opening flaps or airbag cut outs are meant to cover car seats equipped with integrated seat airbags. However, during installation, push the flap through the cut out in such a manner that it can be easily and freely opened during use.

While installing Poly Cotton armrest cover, don’t forget to fasten the Velcro fastener.

Cleaning:

There are certain guidelines that you need to follow for successful cleansing of your Poly Cotton Seat Covers. These cleaning instructions are, namely:

You can use the simple hand washing procedure to cleanse the Poly Cotton Seat Covers that are not so dirty. This washing procedure is especially an easy process that you can execute by using both hands.

To clean the Poly Cotton Seat Covers that are thoroughly dirt and dust ridden, you need to opt for the machine cleaning procedure. Machine cleaning requires large automatic speed control washers (M/Cs) that are available in almost all commercial laundries. However, you are not recommended to use small-sized automatic speed control washers as the washing space is usually small in small M/Cs. Also, you are instructed not to use agitators as agitators are likely to tear off the fabric material of your Poly Cotton Seat Cover.

Poly Cotton Seat Cover Cleaning Process:

This cleansing procedure provides effective finishing treatment to your Poly Cotton Seat Cover fabric and it includes the following steps:

First of all, obtain a non-toxic, non-caustic, eco-friendly and bio- degradable anionic laundry detergent and dip two cups of this detergent on warm/cold water.

In the second step, soak the Poly Cotton Seat Cover on this mixture for 5 minutes and then undertake rinsing of your Poly Cotton Seat Cover with gentle cycles for a period of 5 minutes.

Now, again rinse the seat cover with two cycles in cold water and then rinse it again with one cycle and make it half dry. After that, dry the Poly Cotton Seat Cover completely in normal atmosphere.

Colors & Materials

CUSTOM SEAT COVERS

CUSTOM CAR COVERS

CUSTOM DASH COVERS

CUSTOM FLOOR MATS

View All Floor Mats

Installation & Cleaning

To Top